Before anything else: gas smell or a leaking tank
If you smell gas, don’t try to relight anything. Turn the gas off at the meter or cylinder if it is safe, don’t use electrical switches, ventilate the area, and call AusNet Services on 13 67 07, or 000 if there is fire or immediate danger. If the tank is leaking from its body or base, turn off the cold-water isolation valve on the pipe going into the unit and switch off its power or gas supply. A tank that leaks from the body usually can’t be repaired.
Electric storage systems
- Check the switchboard for a tripped circuit breaker labelled “hot water” or “HWS”. If it trips again straight away, leave it off and call, as the element or thermostat may have failed.
- Many electric systems heat on an off-peak tariff overnight. If the household has used a lot of hot water today, the tank may simply be empty until the next heating period.
- Lukewarm water from a full tank often points to a failed element or thermostat, which a plumber or electrician can test and replace.
Gas storage systems
- Make sure the gas supply is on and other gas appliances are working.
- Look through the viewing window to see if the pilot light is lit. If the manufacturer’s relighting instructions are on the unit and you are comfortable following them, you can try once. If it won’t stay lit, stop and request a callback.
- Strong winds and very cold mornings can blow out or upset outdoor pilot lights.
Continuous-flow (instantaneous) units
- These need both gas and mains power, so check the power point and switchboard.
- Note any error code on the controller or the unit. It tells the plumber a lot before they arrive.
- On a frosty Ballarat morning, frozen water in exposed pipes leading to the unit can stop it firing until they thaw. If the pipes have split, shut the water off and request a callback.
Heat pumps and solar systems
Heat pumps work harder and recover more slowly on very cold days, and solar systems rely on their electric or gas booster in winter. Check that the booster has power or gas and that nothing has tripped at the switchboard. If water is cold even after a full heating cycle, call.
The relief valve
Storage heaters have a pressure and temperature relief valve near the top of the tank, with a drain pipe running from it. A small amount of water dripping while the tank heats can be normal. A constant flow, or the valve releasing very hot water or steam, is not, so turn off the unit and request a callback.
Repair or replace?
Elements, thermostats, thermocouples, valves and igniters can usually be replaced. A corroded or leaking tank generally means a new system. If replacement comes up, ask the plumber to explain your options, including the running costs of gas, electric and heat-pump systems, rather than just quoting a like-for-like swap.
Renting?
Failure of an essential hot-water service is an urgent repair under Victorian rental law. Contact your rental provider or agent straight away and confirm in writing.
Need a plumber in Ballarat? Request a callback and we’ll connect you with one or more local tradies, licensed plumbers who cover your suburb.
Request Urgent Callback